EasyManuals Logo

Cisco ASR 1004 Hardware Installation Guide

Cisco ASR 1004
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
is disabled
fru_name: ESP40
fru_slot: F0
hw_config: ASR-1004 chassis
Reason
The Product ID read from the FRU IDPROM is not supported in this hardware configuration.
Recommended action
Remove the Cisco ASR1000-ESP40 from the chassis.
Unsupported ASR1000-SIP Error Message
This section describes what happens when a Cisco ASR1000-SIP40 is present when the router is booting or
inserted at a later time into the Cisco ASR 1000 Router and provides the error message and explanation as to
why this occurred.
Error message
The ASR1000-SIP40 card is disabled and the following error message displays at the console.
Error message: %CMRP-3-UNSUPPORTED_FRU: [chars] in slot [chars] is not supported with [chars]
and so it is disabled
fru_name: SIP40
fru_slot: 0-1
hw_config: ASR-1004 chassis
Reason
The Product ID read from the FRU IDPROM is not supported in this hardware configuration.
Recommended action
Remove the Cisco ASR1000-SIP40 from the chassis.
Incompatible Cisco High Availability Hardware Configurations
The Cisco ASR 1006 Router hardware configuration for the High Availability feature is incompatible in Cisco
IOS XE Release 3.1S when you have the following hardware configuration combinations:
•
Cisco ASR100-RP1 with a Cisco ASR1000-ESP10 and a Cisco ASR1000-SIP10
•
Cisco ASR100-RP2 with a Cisco ASR1000-ESP20
Upgrading Existing Hardware Components to Support the Cisco ASR 1013
Router
Beginning with Cisco IOS XE Release 3.10S, Cisco ASR 1000 Series Routers have the capability to allow
users to perform upgrades in the field on programmable hardware devices. Field programmable hardware
devices include the Complex Programmable Logic Device (CPLD) and the field programmable gate array
(FPGA).
Cisco ASR 1000 Series Router Hardware Installation Guide
33
Cisco ASR 1000 Series Routers Component Overview
Upgrading Existing Hardware Components to Support the Cisco ASR 1013 Router

Table of Contents

Other manuals for Cisco ASR 1004

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1004 and is the answer not in the manual?

Cisco ASR 1004 Specifications

General IconGeneral
Product TypeRouter
Form FactorRack-mountable
Rack Height2U
Forwarding CapacityUp to 20 Gbps
Total Number of PortsVaries by configuration
Number of Total Expansion Slots4
Product SeriesASR 1000
ModelASR 1004
Forwarding PerformanceUp to 20 Gbps
Operating SystemCisco IOS XE
Power SupplyDual
Route ProcessorASR 1000 Series Route Processor
Network Interface ModulesSFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/PortsVaries by configuration
Expansion Slot TypeSPA
Throughput20 Gbps
RedundancyPower supply, Route Processor
InterfacesGigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
StorageUp to 64 GB Flash

Related product manuals