Cisco ASR 1004 Hardware Installation Guide

Step 4
After the power supply fasteners are loosened, grasp the handle with one hand, support the weight of the power supply
with the other hand, and pull the power supply out of the slot. The following image shows how to remove the Cisco ASR
1001 Router AC power supply cables.
Figure 219: Removing the Cisco ASR 1001 Router AC Power Supply Cables
Step 5
Repeat these steps to remove the AC power supply from Slot PS0.
What to Do Next
This completes the procedure of removing the AC power supply from the Cisco ASR 1001 Router.
Installing DC Input Power on the Cisco ASR 1001 Router
The Cisco ASR 1001 Router DC input connector is compatible with a pluggable Euro-style plug. The input
connector and plug must be UL recognized under UL 486 for field wiring. The connection polarity shall be
from left to right: negative (–), positive (+), and ground. See “Cisco ASR 1001 Router AC Power Supply and
DC Power Supply” figure in the Cisco ASR 1001 Router Power Supply Installation section.
Cisco ASR 1000 Series Router Hardware Installation Guide
451
Cisco ASR 1001 Router Overview and Installation
Installing DC Input Power on the Cisco ASR 1001 Router

Cisco ASR 1004 Specifications

General

Brand	Cisco
Model	ASR 1004
Category	Network Router
Language	English