Cisco ASR 1004 Hardware Installation Guide

The following image shows the cable-management bracket attached to the chassis in a rack.
Figure 45: Installing the Cable-Management Bracket
Chassis front rack-mount
bracket and ear holes
3Cable-management bracket
screw location
1
——
Cable-management bracket2
What to Do Next
This completes the procedure for installing the cable-management brackets on the chassis.
Cisco ASR 1000 Series Router Hardware Installation Guide
160
Cisco ASR 1006 Router Overview and Installation
Attaching the Cable-Management Brackets

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash