Cisco ASR 1004 Hardware Installation Guide

DETAILED STEPS
Step 1
Place the bottom packing material section inside the bottom of the shipping container.
Step 2
Use at least two people to place the Cisco ASR 1000 Series Router inside the container. Be sure that the chassis is
positioned correctly before you lower it inside the container.
Step 3
Place the top packing material over the top of the Cisco ASR 1000 Series Router.
Step 4
Place both accessory boxes inside the cutouts in the top section of the packing material.
Step 5
Fold the outside carton down over the top of the accessory boxes and seal with packing tape.
Step 6
Wrap two packaging straps tightly around the top and bottom of the package to hold the outside carton and the bottom
pallet.
Do not use tape to hold the outside carton to the bottom pallet. Packaging straps must be used.Caution
What to Do Next
This completes the procedure for repacking the shipping container.
Cisco ASR 1000 Series Router Hardware Installation Guide
613
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Repacking the Router

Cisco ASR 1004 Specifications

General

Brand	Cisco
Model	ASR 1004
Category	Network Router
Language	English