CONTACTS
WORKING WITH CONTACTS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 165
Adding a simple call
A simple call requires an address only at this stage of the definition process.
To continue with adding a Selective, Channel Test, Emergency, Get Position or Send
Position call:
1 Press to move to the Selcall|ALE Address entry.
1 Enter the address of the station that you want to call.
1 Continue from Completing the contact on page 169.
Related links:
Selective call on page 440
Channel Test call on page 435
Emergency call on page 436
Get Position call on page 437
Send Position call on page 441
Adding a Message call
To continue with adding a Message call:
1 Press to move to the Selcall|ALE Address entry.
1 Enter the address of the station that you want to call.
1 Press to move to the Message entry, then press .
NOTE: If you want to be prompted to enter a message at the time of the
call, leave the value for the Message entry as <Empty>.
To Next Page
Loading...
Need help?
General
