CONTACTS
WORKING WITH CONTACTS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 167
Adding a Phone call
To continue with adding a Phone call:
1 Press to move to the Phone Link entry.
NOTE: This entry is shown if there are two or more phone links from
which to choose.
1 Press or to select the phone link that you want to use, or select <Prompt>
if you want to be prompted to select a phone link at the time of making the call.
1 Press to move to the Phone Number entry.
1 Enter the phone number.
1 Continue from Completing the contact on page 169.
Related links:
Phone call on page 440
Adding a Get Status call
To continue with adding a Get Status call:
1 Press to move to the Selcall|ALE Address entry.
1 Enter the address of the station that you want to call.
1 Press to move to the Status Type entry, then press .
To Next Page
Loading...
Need help?
General
