CDM-625 Advanced Satellite Modem Revision 13
IP Packet Processor Option MN-CDM625
18–11
The illustration a t r ight i dentifies t he u pgrade l ocations
within the chassis for:
• Installation of the fan into the chassis;
• Plug-in of both the fan power cable and IP Packet
Processor Card into the modem’s framing board;
• Assembly of the IP Packet Processor Card onto
the chassis-mounted card bosses.
Unplug t he f ront p anel r ibbon c able f rom i ts c onnector on
the modem’s framing board, and then move the cable out of
the way of the upgrade location.
To Next Page
Loading...
