CDM-625 Advanced Satellite Modem Revision 13
Appendix D MN-CDM625
D–64
Parameter
Type
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
(Instruction &
Qualifier)
Response to
Query
IP Host Access List Enable/Disable in the form x, where:
0 = Host Access List is Disabled
1 = Host Access List is Enabled
(see Description of
Arguments)
Valid only when Packet Processor is installed and Enabled.
Packet Processor Redundancy Enable/Disable, where:
0 = Disable Packet Processor Redundancy
1 = Enable Packet Processor Redundancy
(see Description of
Arguments)
Precision Time Protocol Feature Enable/Disable in the form x, where:
0 = PTP is Disabled
(see Description of
Arguments)
Precision Time Protocol Grandmaster selection in the form x, where:
0 = Grandmaster reachable over LAN.
1 = Grandmaster reachable over WAN.
(see Description of
Arguments)
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Bootrom firmware version.
x is variable length of
text
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Image 1 firmware version.
x is variable length of
text
Processor
Image2 FW
Version
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Image 2 firmware version.
x is variable length of
text
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Running firmware image.
x is variable length of
text
To Next Page
Loading...
