Datalogic Magellan 9300i

Flowcharts
Product Reference Guide 71
Figure 41. Problem Isolation: No Transmit to POS
DONE
DONE
NO TRANSMIT TO POS
START
Verify programmable
parameters using the
information and programming
bar codes provided in the
Programming Section. Check
interface and I/F options,
inactive symbologies and other
configurable features.
Troubleshoot
the host or call
Tech Support.
YES
NO
Check the interface (I/F)
cable connections. If
possible, retest the
system using a
known-good I/F cable.
YES
NO
Does the
scanner pass
the data to
the POS
?
Does the
scanner pass
the data to
the POS
?