DESCRIPTION N·m Ft. Lbs. In. Lbs.
Bolt-Bracket to High Pres-
sure Pump
9 - 80
Bolt-High Pressure Pump
to Cylinder Head
14 - 124
Bolt-Pre-delivery Pump to
Top Cover of Cylinder
Head
9 - 80
Bolt-Pressure Control
Valve to Rail (2 stage,
torque)
3/5 - 26/44
Bolt-Rail to Cylinder Head 14 - 124
Bolt-Shutoff Valve to Cyl-
inder Head
8 - 70
Nut-Pressure Line to Rail/
Injector (New,Reused)
22/25 16/18.5 -
Nut-Pressure Line to High
Pressure Pump/Rail
22 16 -
Screw-Tensioning Claw to
Injector (2 stage, 1
torque, 1 torque angle)
7/90° - 62, 90°
Rail-Pressure Sensor to
Rail
22 16 -
Pressure Pipe Connection
to Injector
42 31 -
Threaded Rail to Rail 22 16 -
Fuel Cooling System
Bolt-Fuel Cooler to
Charge Air Distribution
Pipe
14 - 124
Heater Booster, Heater Unit
Bolt- Temperature Con-
trolled Cut Out to Heater
Booster Control Module
12 - 106
Nut-Threaded Stud to
Electronic Heater Booster
18 - 159
9 - 16 ENGINE VA
To Next Page
Loading...
