INSTALLATION
(1) If fu el cooler lines (Fig. 27) a re to be insta lled,
use specia l pliers #9539 (Fig. 28).
(2) If fuel tank is t o be repla ced, in stall fuel pu mp
module into tan k. Refer to Fuel Pu mp Modu le
Removal/Installation pr ocedures.
(3) Position fuel tank t o hydr aulic jack.
(4) Raise tan k un til positioned nea r body.
Fig. 23 FUEL TANK ASSEMBLY
1 - Strap Bolts (2)
2 - Hose (not with all engines)
3 - Fuel Outlet Line
4 - Fuel Return Line
5 - Plug
6 - Fuel Tank
7 - Tank Straps (2)
8 - Nuts (2)
9 - Filler Tube
10 - Vent Hose
11 - Hose
12 - Clamps
13 - Cushioning Material
14 - Two-Way Valve
Fig. 24 FUEL COOLER LINES
1 - Expansion Tank
2 - Top of Tank
3 - Thermostat (Preheating Valve)
4 - Cooler Lines
5 - Connecting Hoses/Clamps
Fig. 25 FUEL LINE PLIERS-9539
14 - 26 FUEL DELIVERY VA
To Next Page
Loading...
