(16) Remove the screws holding the side covers to
the valve body an d valve housing.
(17) Remove all va lves an d springs fr om th e valve
body (1) (Fig. 132). Check all va lves for ease of move-
ment and shavings.
NOTE: The sleeves and pistons of the overlap reg-
ulating valves must not be mixed up.
Fig. 132 Valve Body Components
1 - VALVE BODY 8 - SHIFT VALVE PRESSURE REGULATING VALVE
2 - 1-2/4-5 COMMAND VALVE 9 - B2 SHIFT VALVE
3 - 1-2/4-5 HOLDING PRESSURE SHIFT VALVE 10 - 2-3 HOLDING PRESSURE SHIFT VALVE
4 - 1-2/4-5 SHIFT PRESSURE SHIFT VALVE 11 - 2-3 COMMAND VALVE
5 - 1-2/4-5 OVERLAP REGULATING VALVE, SLEEVE, AND PIS-
TON
12 - 2-3 SHIFT PRESSURE SHIFT VALVE
6 - SHIFT PRESSURE REGULATING VALVE 13 - TCC LOCK-UP REGULATING VALVE
7 - REGULATING VALVE PRESSURE REGULATING VALVE 14 - TCC DAMPER VALVE - if equipped
21 - 124 AUTOMATIC TRANSMISSION NAG1 - SERVICE INFORMATION VA
To Next Page
Loading...
