NOTE: Remove any mineral spirits with a clean
cloth after glass installation.
(6) Verify tha t th e sea l is seat ed in the window
openin g (Fig. 25).
(7) Test th e window for wa ter leaks. (Refer to 23 -
BODY - DIAGNOSIS AND TESTING - WATER
LEAKS)
Fig. 25 Glass & Weatherstrip Seal Installation
1 - BODY PANEL
2 - WEATHERSTRIP SEAL
3 - INSTALLATION CORD
4 - WINDOW OPENING
VA DOORS - SLIDING 23 - 47
To Next Page
Loading...
