Dodge Sprinter 2006 - Page 745

TWO / THREE - PIECE PROPELLER SHAFT
The procedu re t o measure the propeller sha ft
angles involved with a two/thr ee-piece (Fig. 5) pr opel-
ler shaft is the sam e a s those for a one-piece pr opel-
ler shaft.
Fig. 4 UNIVERSAL JOINT ANGLE EXAMPLE
1 - 4.9° Angle (C)
2 - 3.2° Angle (B)
3 - Input Yoke
4 - 3.0° Angle (A)
5 - Output Yoke
VA PROPELLER SHAFT 3 - 5