BEARI N GS - DI FFEREN T I AL
CASE
REMOVAL
(1) Remove differen tial bearings with Pu ller
C-293-PA (1), Plug C-293-3 (2) an d fou r Adapter s
C-293-37 (3) (Fig. 55).
INSTALLATION
(1) Set differen tia l on Plug C-293-3.
(2) In st all differ ential (2) bear ings (3) with
In st aller 9523 (4) and H andle C-4171 (1) (Fig. 56).
(3) In st all differen tia l case in axle.
Fig. 55 CASE BEARING PULLER
1 - PULLER
2 - PLUG
3- ADAPTERS
Fig. 56 DIFFERENTIAL BEARINGS
1 - HANDLE
2 - DIFFERENTIAL
3 - BEARING
4 - INSTALLER
3-38 REARAXLE VA
To Next Page