Revision History
Revision Date:
July 2004
April 2005
Notice: The DSX™ Automated ELISA System is covered by a warranty (a copy of which is
enclosed in this manual). The customer is required to perform routine maintenance as
described in the user’s manual on a periodic basis to keep the warranty in effect.
DYNEX Technologies reserves the right to make technical improvements to this equipment
and documentation without notice as part of a continuous program of product development.
This manual supersedes all previous editions.
The material included in this manual is provided to assist service engineers in the
maintenance and repair of the DSX™ Automated ELISA System. It is assumed that the
individual using this manual has sufficient training in the service of analytical instrumentation
and is aware of the potential hazards including (but not limited to) electrical hazards, chemical
hazards and mechanical hazards.
If this manual is provided to an end user, it is with the understanding that the material
included herein is proprietary to DYNEX Technologies, Inc. The user may not provide this
material to a third party without the written permission of DYNEX Technologies.
Questions or comments regarding the content of this manual can be directed to:
DYNEX Technologies, Inc.
14340 Sullyfield Circle
Chantilly VA 20151-1683 USA
Phone: (800) 288-2354 (USA only)
(703) 631-7800
Fax: (703) 803-1441
Part No. 91000090, Revision B
DSX™ Automated ELISA System is a trademark of DYNEX Technologies, Inc.
This manual is published by DYNEX Technologies, Inc.
2001, 2005 This document is the copyright of DYNEX Technologies, Inc. and must not be
copied or reproduced in any form without prior consent.
DYNEX Technologies reserves the right to make technical improvements to this equipment
and documentation without prior notice as part of a continuous program of product
development. This manual supersedes all previous editions.
To Next Page
Loading...
