GE LOGIQ S7 Pro - Setting Printer to Print Reports; Setting up the Printer to Print Reports

GE HEALTHCARERAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
3-38 Section 3-8 - Printer Installation
3-8-6 Setting Printer to Print Reports
3-8-6-1 Setting up the Printer to Print Reports
To set up the Off-Line Printer to print reports,
1.) Press Utility -> System -> Peripherals.
2.) Select the printer from Default Printer pull-down menu.
Figure 3-28 Report Printer Setup
3.) Press Save.
4.) Press Print on the Report screen to print the report.