GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-29
5-9-2-2 How the Customer enables/disables Disruptive Mode and VCO
1.) If not already in read mode, FREEZE
the image.
2.) Move the cursor to the GE icon and press the
right trackball key (= right-click).
3.) Select Connect Clinical Lifeline (see: Figure 5-13 below).
This activates “Disruptive Mode” and “VCO” for the application OLC to quickly assist the customer.
NOTE: To disable disruptive mode, select "CANCEL".
Figure 5-13 Connect Clinical Lifeline
To Next Page
Loading...
