GE HEALTHCARERAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
3-20 Section 3-6 - Connection of Auxiliary Devices
3-6-8 General Remarks and Hints when using external USB-Devices
3-6-8-1 External USB-Devices - Connection
When an external USB-storage device (such as a USB-memory stick or an external hard disk) is
connected to the LOGIQ™ S7 Expert/Pro, Windows detects the device and automatically installs a
driver. During this process, several dialogs may pop up, starting with the “Found New Hardware“ dialog.
The device is then accessible using the drive letter the system assigned to it.
3-6-8-2 External USB-Devices - Disconnection
To stop the external device, press F3 EJECT
button.
!! WARNING:
Do not connect or disconnect any external USB-devices to or from the system while
scanning a patient! The appearing dialogs could distract you from the scan!
!! NOTICE:
When connecting external USB devices, be sure to execute Safety Directions found in the
LOGIQ™ S7 Expert/Pro Basic User Manual.
!! CAUTION:
Unplugging or ejecting USB devices without first stopping them can often cause the system to
crash and possibly result in loss of valuable data.
To Next Page
Loading...
