GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-119
8-27-3-3 Removal Procedure - Extended Probe Holder
1.) Remove two screws from Cable Hook as shown below
.
Figure 8-134 Probe Holder
8-27-4 Installation Procedure
1.) Parts to be installed in reverse order of removal.
8-27-5 Functional Check
Visual Check. Make sure parts are installed without any loose parts.
To Next Page
Loading...
