GE LOGIQ S7 Pro - Replacement of Rear Handle

GE HEALTHCARERAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
8-88 Section 8-19 - Replacement of Rear Handle
Section 8-19
Replacement of Rear Handle
8-19-1 Manpower
1 person, 10 min.
8-19-2 Tools
Hex Wrench.
8-19-3 Removal Procedure
1.) Remove Rear Cover.
2.) Remove 3 cap screws.
Figure 8-92 Rear Handle
8-19-4 Installation Procedure
1.) Parts to be installed in reverse order of removal.
8-19-5 Functional Check
Visual Check only.
CAUTION
!! CAUTION:
Rear Handle will not stay in position without screws. Make sure not to drop the part when
removing/installing Rear Handle