GE LOGIQ S7 Pro - Removal Procedure - Side Cover (R)

GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-43
8-8-3-2 Removal Procedure - Side Cover (R)
Figure 8-24 Side Cover (R)
1.) Remove Top Cover.
2.) Remove three screws for Side Cover (R).
Figure 8-25 Side Cover (R) screw
3.) Pull out Side Cover (R). There is mechanical hook on bottom of the part.
Figure 8-26 Pull out SIde Cover (R)
Side Cover (L) Side Cover (R)