GE HEALTHCARERAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
3-18 Section 3-6 - Connection of Auxiliary Devices
3-6-5 Connecting the Footswitch
The footswitch should be directly connected to any accessible USB-port on the LOGIQ™ S7 Expert/Pro
(e.g., on rear of the system).
NOTE: Connection of the Footswitch is always the same
(no differences between PC-Motherboard version of the system)..
Figure 3-9 Connection Scheme - Footswitch
To Next Page
Loading...
