GE HEALTHCARERAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
8-120 Section 8-28 - Replacement of AC Cable Holder
Section 8-28
Replacement of AC Cable Holder
8-28-1 Manpower
1 person, 5 minutes.
8-28-2 Tools
Phillips Screwdriver.
8-28-3 Removal Procedure
1.) Remove 2 Screws from AC Cable Holder
NOTE: This procedure applicable to all AC Power Cord replacement
Figure 8-135 AC Cable Holder
8-28-4 Installation Procedure
1.) Parts to be installed in reverse order of removal.
8-28-5 Functional Check
Test Refer to Note
Power On/Off Section 4-3-3
To Next Page
Loading...
