GE LOGIQ S7 Pro - Packing Materials - Recycling Information

GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 3 - Setup Instructions 3-7
Section 3-4
Packing materials - recycling information
The packing materials for LOGIQ™ S7 Expert/Pro are recyclable:
• The Transportation Box is made of cardboard.
• The inner reinforcements are made of Ethafoam (Polyethylene foam).
• The plastic foil is made of LDPE (Low Density Polyethylene).
6.
Unlock the casters and place the 4 caster's derection like the picture below and then
using the incline plane of the box bottom assy, slowly
move the system from the box.
Note: Packing crate and material should be stored for future use.
Table 3-5 Unpacking Procedure
Step Task