GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-103
3.) Disconnect two harnesses from Polaris-Battery.
4.) Unfasten "BOB Assy" using "SCREW WH M3X6"
8-22-4 Installation Procedure
Install components in reverse order of removal.
8-22-5 Functional Check
Refer to Section 4-4 for Functional Diag Test List.
To Next Page
Loading...
