GE LOGIQ S7 Pro - Osd; Language; H-Position; V-Postion

GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 6 - Service Adjustments 6-7
6-3-3 OSD
6-3-3-1 Language
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> LANGUAGE by pressing the < LEFT or RIGHT > button to move the cursor and
the MENU (middle) key.
3.) Select English/German/French/Spanish/ Italian/Swedish/Chinese/Japanese by pressing the <
LEFT or RIGHT > button to decrease/increase the value and the MENU (middle) key.(Default :
English)
6-3-3-2 H-Position
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> H-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the H-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase the
value.(default : 50)
6-3-3-3 V-Postion
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> V-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the V-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase the
value.(default : 50)
6-3-3-4 Half Tone
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> HALF TONE by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
Figure 6-6 OSD