GE LOGIQ S7 Pro User Manual

GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 4 - Functional Checks 4-1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ™ S7 Expert/Pro
scanner diagnostics by using the built-in service software, and power supply adjustments.
Section 4-2
Required Equipment
• An empty (blank) CD-R, DVD-R, and/or external USB devices (stick or hard disk drive for data
storage/backup. A DVD+RW disc for DVR recording
• At least one transducer. See Chapter 9 - Probes, on page 9-19 for an overview.
(normally you should check all the transducers used on the system)
Table 4-1 Contents in Chapter 4
Section Description Page Number
4-1
Overview
4-1
4-1-1
Purpose of Chapter 4
4-1
4-2
Required Equipment
4-1
4-3
General Procedure
4-2
4-3-1
System Exterior Visual Check
4-2
4-3-2
Mechanical Parts Functional Check
4-5
4-3-3
Power On/Off
4-11
4-3-4
System Information
4-17
4-3-5
System Integration Checks
4-20
4-3-6
Peripheral Checks
4-22
4-3-7
Mode Transition Checks
4-23
4-3-8
OPIO Interface Check
4-28
4-4
Board Diagnostics
4-32
NOTICE
!! NOTICE:
Most of the information pertaining to this Functional Checks chapter is found in the LOGIQ™ S7 Expert/
Pro Basic User Manual;

GE LOGIQ S7 Pro Specifications

General

Brand	GE
Model	LOGIQ S7 Pro
Category	Laboratory Equipment
Language	English