GE LOGIQ S7 Pro - Removal Procedure (Monitor Cable and OPIO Cable)

GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-109
8-25-5 Removal Procedure (Monitor Cable and OPIO Cable)
1.) Unscrew 1 screw to remove F-Block Bottom Cover.
2.) Remove Cable tie and Gently push connector through center of OPIO base.
3.) Pull cable downward.