GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-111
7.) Pull out the Cable through the hole.
8.) Unscrew five screws to separate back panel and disconnect Main power cable.
9.) Unscrew three screws to remove Cable Cover Bracket. Refer to the figure below.
Figure 8-119 Pull out the Cable through the hole
Figure 8-120 Disconnecting the Main power cable
Figure 8-121 Removing the cable cover bracket
To Next Page
Loading...
