iPECS UCP600 - Page 104

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
90
Table 4.4.2.17-1 STATION VM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Auto Talk Recording
Option
This field enables unconditional recording of all calls
placed/received by the station. Recordings, in .wav format,
are stored at the UCS Client defined as the Call Recording
Station below.
OFF,
ALL,
CO
OFF
Auto Talk Recording
Destination
When Auto Call Recording is defined for a station, the
destination for the recording is defined here. The UCS
Client Station number or an IPCR or 3rd party SIP
recording server.
Station or
Group
VSF MSG Date/Time
When ON, the date/time the message was received is
played to the user prior to the message.
OFF
ON
ON
VM Password check
When ON, the user must enter their valid Authorization
code to access their VSF Voice Mailbox. The password can
be defined as none, the Authorization code only, or the
normal Station Number and Authorization code.
No password, Password only, Station number and
password
Refer to
description
Password
only
VMID Number
When using an adjunct VM, the system can translate the
Mailbox number from the user’s station number to the
assigned VMID. The system sends the station number or
VMID, if assigned, to the VM (in-band or SMDI) in order to
identify the appropriate Voice Mailbox.
Default: eMG80/100:100, eMG800:1000, UCP:1000
Max. 8 digit
Refer to
description
Retrieve MSG
Method
Based on this entry, messages stored in the VSF may be
retrieved in either a FIFO (first-in-first-out) or LIFO (last-in-
first-out) order.
FIFO/
LIFO
LIFO
Wake-Up
Announcement
A VSF system announcement can be recorded to play to
the station as a Wakeup Announcement.
0-200
0
Two-way record
announcement
The two-way record announcement can be recorded to play
to the station as Announcement.
0-200
0
Message Wait
Notice(MWI, CLI, VM)
When a user has voice mail, the system can provide this as
a voice prompt instead of a dial tone according to the option
based on station.
 Disable: The system provides a normal dial tone
when a user goes to off-hook status.
 Tone: The system provides a warning tone instead of
a dial tone to indicate when a user goes to off-hook
status.
 Prompt: The system provides message indication as
a voice prompt when a user goes to off-hook status.
DECT phones do not support this feature.
Disable,
Tone,
Prompt
Tone
Password Retry
Attempts
Password retry count for voice mailbox access
Disable
1~5
Disable
All Clear ACR
If All Clear ACR is ON, it will work as on-demand recording
using pressing the two-way record button.
OFF
ON
OFF