iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
148
4.4.5.2 Config Encryption
The passphrase is used for DB encryption. If the value is set, the private data in your system will be
encrypted. Therefore even if the files which include private data are leaked, they cannot be read. When you
don’t want this encryption feature, you have to set the passphrase to blank.
Note that, before the encryption, it is better backup your DB for the emergency case and remember the
passphrase. Otherwise, you cannot decrypt the system DB.
If the passphrase is assigned, the system DB, which includes private data, will be encrypted.
If the passphrase is lost, you cannot change it or decrypted system DBs,
Figure 4.4.5.2-1 Config Encryption
VM recording message (user message wait) is encrypted if it is ON.
The e-mail attached file is not encrypted. So "Attach Message Option"
in PGM127 should be OFF if the user does not want to send an un-
encrypted recording file.
ON: VM recording file is encrypted.
OFF: VM recording file is not encrypted.
System DB that has personal information is encrypted if a Passphrase
is assigned.
It could not be changed if Passphrase is lost (there is no way to
change/remove it)
To Next Page
Loading...
