iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
79
4.4.2.8 Internal Page Zone Access - PGM 118
Selecting Internal Page Zone will display the Internal Page Zone data input page. Enter a valid station range
and click [Load] to enter the Internal Page Zone Access data. Check the appropriate boxes to allow or delete
access to each Internal Page Zone. Click the [Save] button after changing Value to apply.
Figure 4.4.2.8-1 Internal Page Zone
Each iPECS IP and LDP Phone is assigned to receive announcements from each Internal Page Zone. A
station can be assigned to any, all, or no-zones. Note a remote station or a station not assigned to any Internal
Zone will not receive any page announcements, including Internal All Call. As a default, all stations except
remote stations are assigned to zone 1.
Figure 4.4.2.8-2 Internal Page Zone overview
To Next Page
Loading...
