iPECS UCP600 - Station Admin Programming for Emg

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
14
 H.323 Routing Table
 T-NET Data
 Zone Data
 Device Login
 UCS Data
 DECT Data
 Redundancy Data (for UCP600 & UCP2400)
 Hotel Data
 Green Mode for eMG
 Initialization
The default and range of values for each configurable parameter are provided in Section Web admin
programming. The index and charts are helpful references when entering data into the system‘s database.
3 Station Admin Programming for eMG
The Station Admin Programming for eMG is moved to Appendix D. Please refer to Appendix D for the detail
station Admin program.