iPECS UCP600 - S;W Upgrade

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
387
4.5.1 S/W Upgrade
iPECS system employs a NAND-based memory file system; thus, we can upload html, UCP/MPB upgrade,
and iPECS appliance image files without impacting the current database. All of the iPECS series modules can
be upgraded by remote access through the system. Selecting S/W Upgrade from the Maintenance page
displays the Appliance Version page and sub-menus display in the left frame as shown in the following figure.
Figure 4.5.1-1 S/W Upgrade
There are two types of upgrade images: application and kernel image. If both are required, upgrade the kernel
first and then the application.
The VMIU is part of the MPB, and VSF prompts are upgraded by uploading prompt files to the MPB. VMIB
prompts are upgraded by direct upload of prompt files to the VMIB.