iPECS UCP600 - System Data; System Attributes - PGM 160 & 161

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
133
4.4.5 System Data
Selecting the System Data program group returns the sub-menu displayed in the left frame, as shown in the
following figure.
Figure 4.4.5-1 System Data Main Page
4.4.5.1 System Attributes - PGM 160 & 161
Selecting System Attributes will display the System Attributes data entry page. Selecting the blue-colored text
in the Table header will sort the table based on the selected column. Click the [Save] button after changing
Value.
Figure 4.4.5.1-1 System Attributes
System Attributes define settings that affect system-wide features and functions. Generally, the entry will turn
the feature ON (enable) or OFF (disable). Refer to Table 4.4.5.1-1 for a description of the Attributes and the
data entries required.
Setting CID Password directly
You can set the CID password by clicking the “Go to Setting” button. After clicking it, you will move to the
following PGM 162, set the CID password, save the CID password from the marking tick on the save box, and
click the Save button.