iPECS UCP600 - Network Feature Code Table - PGM 325

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
261
4.3.10.5 Network Feature Code Table – PGM 325
PROCEDURE:
NET FEATURE CODE TBL
ENTER BIN NO (01-20)
Press the [PGM] button and dial 325, and enter the bin number (Ex.01).
01 NET FEATURE CODE TBL
PRESS FLEX KEY (1-2)
Use the dial-pad to enter bin no.
Press the Flex button 1~2 for the desired setting. Refer to Table 3.3.10.5-
1.
Use the dial-pad to enter the required data. Refer to Table 3.3.10.5-1.
Press the [Save] button to store the new data.
Table 3.3.10.5-1 NETWORK FEATURE CODE TABLE (PGM 325)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
1
01 NET FEATURE CODE
...............
Networking Feature Code programming for Networking
paging calls.
16 digits
2
01 NET DEST
NONE (1-6)
Select network feature type (1-6) and dial the associated
number.
1: INT PAGE ZONE : (eMG80/100:01-35/eMG800:1-100)
2: EXT PAGE ZONE : (1-1)
3: ALL CALL PAGE ZONE : 1(INT), 2(EXT), 3(ALL)
4: DOOR OPEN : 1~2
5: Conference Room : (1-9)
6: Call park : (eMG80/100:01-19/eMG800:1-200)
Refer to
description