iPECS UCP600 - Attendant Assignment - PGM 164

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
163
Table 4.4.5.11-1 Silent Text Messages
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Subject
Normally, just dummy(not used).
Backup for 'Name' of Page (Used instead of 'Name' of the Flexible
Page if it is empty).
Backup for 'Contents' (Used instead of 'Contents' of a Silent Text
message if it is empty).
Max. 32
character
Contents
It is used for SMS messages.
Max. 80
character
4.4.5.12 Attendant Assignment - PGM 164
Selecting Attendant Assignment will display the Attendant Assignment data entry page. Click the [Save] button
after changing Value.
Figure 4.4.5.12-1 Attendant Assignment
The eMG80/100 is consists of 1 System attendant and 3 Main attendants. eMG800 is consists of 1 System
attendant and 4 Main attendants. UCP is consists of 1 System attendant and 49 Main attendants.
The System Attendant has higher priority in call handling and system management functions. As a default, the
System Attendant is assigned Station 100 for eMG80/100& Station 1000 for eMG800/UCP. Main Attendants
are not assigned by default.