iPECS UCP600 - VM COS Attributes - PGM 253

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
205
4.4.5.38 VM COS Attributes – PGM 253
Selecting VM COS Attributes will display the VM COS Attributes data entry page. Select a valid VM COS and
click [Load] to enter VM COS data. Click the [Save] button after changing Value.
Figure 4.4.5.38-1 VM COS Attributes
VM COS establishes various common characteristics of the user’s Voice Mailbox, including greeting and
message length, E-mail notification, message retention, etc.
Table 4.4.5.38-1 VM COS ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Greeting Length
This defines maximum user greeting length.
0-
99(Seconds)
60
Message Length
This defines maximum user message recording time.
0-
600(Seconds)
0
Number Of Messages
This defines the maximum number of voice mail
messages.
0-250
0
Retention Time
Voice mail messages will be automatically deleted after
this number of days.
0-99Days
0
E-Mail Notification
E-mail notification can be enabled or disabled and, if
enabled, the message can be deleted after notification.
Disable, Notification Only, Notification & Delete
Refer to
description
Notification
& Delete
Future Delivery
Message
Future Delivery of messages can be enabled or
disabled.
OFF
ON
OFF
Confirm Message
Receipt
Confirm message receipt can be enabled or disabled.
OFF
ON
OFF
Private Message Mark
Private message marks can be enabled or disabled.
OFF
ON
OFF