iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
331
4.4.11.1 H.323 Basic Attributes -PGM 326
Selecting H.323 Basic Attributes will display the data entry page. Click the [Save] button after changing Value.
Enter Device/GW slot sequence number: eMG80/100: 1-300 / eMG800: 1-2890 / UCP: 1-3688
Figure 4.4.11.1-1 H.323 Basic Attributes
H.323 Signaling can be operated with each VOIB/VOIM or MPB/UCP.
If it is set to ON, the system allows H.323 signaling with a
system IP address. Or, each VOIB/VOIM IP Address can be
used.
To Next Page
Loading...
