iPECS UCP600 - Station Data -PGM 110-125; Station Type -PGM 110

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
92
Table 4.4.2.17-1 STATION VM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Cascade Method
The Cascade method is determined.
Disable, Copy, Move
Refer to
description
Disable
Cascade Message
Type
Cascade Message Type is determined.
Normal Only, Urgent Only, All
Refer to
description
Normal only
Cascade Apply Timer
Cascade Apply Timer is set.
001 ~250
(min)
0
Cascade For Read
Message
If this value is set to Enable, the left message can be
cascaded to the next destination regardless the message is
read or not.
If this value is set to Disable, cascading action is stopped
when the left message is read.
0: Disable
1: Enable
Enable
E-Mail notification
[Send Mail] button: click the [Send mail] button to send mail for notification
E-Mail Notification
Enable
If this option is set ON, the system sends Email as soon as
getting Voice mail.
OFF
ON
OFF
SMTP Server
Address (IP or
Domain Name)
This field defines the address or URL of the SMTP mail
server for the notification.
IP v4 addressor Mail server name
Refer to
description
Max. 64
characters
SMTP Port
This field defines the TCP/IP port the system will employ
when communicating with the SMTP E-mail server.
1 - 65535
25
SMTP Security
Connection
The system can support basic security policies when
communicating with the SMTP E-mail server. Note the
server must also be configured for the selected security
protocol.
No Security, SSL, TLS
Refer to
description
No Security
E-Mail Account ID
This field defines the account Identification for the system
configured in the SMTP server.
E-Mail Account
Password
This field defines the password for the system’s E-mail
account in the SMTP server.
Max. 64
characters
Sender E-Mail
Address (From)
This field defines the E-mail address used to send the new
Voice Message notification via E-mail.
E-mail
address
Receiver E-Mail
Address (To)
This field defines the E-mail address to notify when a new
VSF message is received for the station.
E-mail
address
Attach Message
Option
When E-mail notification is enabled in the VM COS (PGM
253), the E-mail may include the voice mail as a wav file
attachment. The proper information must be assigned for
the receiver mail and system mail account information.
OFF
ON
ON
Delete Message
Option
After sending an e-mail notification, the system will
automatically delete the Voice message from the user’s
Voice Mailbox if this parameter is ON.
OFF
ON
OFF