iPECS UCP600 - System Speed Zone Table - PGM 232

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
308
4.4.9.13 System Speed Zone Table - PGM 232
Selecting System Speed Zone will display the System Speed Zone data entry page. Click the [Save] button
after changing Value.
Figure 4.4.9.13-1 System Speed Zone
System Speed Dial Bins assigned to a zone are only available to stations allowed access to that zone. Each
zone can be assigned to apply the appropriate Station and CO Line COS for the speed dial number prior to
dialing. The speed Bin in Zone and Station Range to access zone is different according to selecting Speed
Numbering; refer to ‘Speed Numbering’ in System ID (100)
Table 4.4.9.13-1 SYSTEM SPEED ZONES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Speed Bin Range
in Zone
A range of Speed Dial Bins is assigned to a zone.
Station Range to
Access Zone
A range of Stations is permitted access to the System Speed dials
in the Zone.
Toll Checking
Toll restriction can be applied to Speed Dials in the Zone.
OFF
ON
ON
Auth Checking
The user can be required to enter a valid Authorization code to
use Speed Dials in the zone.
OFF
ON
ON