iPECS UCP600 - Static Route Attributes - PGM 254

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
206
4.4.5.39 Static Route Attributes – PGM 254
Selecting Static route Attributes will display the static route attributes data entry page. Click the [Save] button
after changing Value.
Figure 4.4.5.39-1 Static Route Table Attributes
Table 4.4.5.39-1 STATIC ROUTE TABLE ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Net address
Network IP address
IP address
Net mask
Net mask
Gateway IP address
Gateway(route) IP address
IP address