iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
404
4.5.10 VSF System Greeting
The System Greetings (Announcements) can be downloaded from the system or Uploaded to the system.
Individual announcements can be recorded externally and then uploaded to the system. Like prompts, the
individual announcement files must be in a .wav format using the g.711 codec. Individual greetings for each
Language position can be uploaded as well as downloaded. Clicking on the message will download the
message to the browser, which will play the message. To save the message, right-click and select save as.
Locate a directory and change the file name, if desired, and click save.
All announcements can be downloaded from the system as a backup file and uploaded to the VSF memory as
required.
UCP2400 doesn’t support VSF system greetings.
4.5.10.1 Individual Upload
Selecting Individual Upload displays the page shown in Figure 4.5.10.1-1. From this page, pre-recorded
announcements for each language position can be uploaded to the VSF gateway from the PC. Select the
language position and ensure the file name matches the appropriate System Announcement number. The file
format must be shown on the page.
Figure 4.5.10.1-1 Individual Upload
To Next Page
Loading...
