iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
73
4.2 Data Entry Mode
Limited data entry can be accomplished from an Admin Station or station assigned for data entry (Station
Attributes III PGM 113, Flex button 1). After initialization and registration, any enabled iPECS IP or LDP Phone
may access the system database. In addition, as default, there is no Station Admin password defined. To enter
the Program mode from the Admin Station, follow the procedure below. The LCD displays in the left column of
the chart, and in the right column are step-by-step instructions to modify database items.
Enter the Admin password. A confirmation tone is received. As a
default, there is no password, and this step is skipped.
To select a program, use the instructions in the following sections,
starting with “Press the [PGM] button” and dial the specified Admin
Program code.
To Next Page
Loading...
