iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
30
4.3.5.7 Set Maintenance ID & Password
The Wizard includes a password entry page. It is strongly recommended that a unique User ID and strong
password be entered to minimize unauthorized personnel's risk of admin and maintenance access. In order to
finish the final step, you should register at least a maintenance ID. If not so, the Wizard can’t go on to the next.
Also, the Keyset admin password can be registered on this page.
NOTE)
The new information will be in effect immediately upon saving the information. When a new Admin User ID
and Password are saved, the Web login screen appears. A new Admin session will be required using the new
login credentials. The number of Tenancy groups for each system is as below:
4.3.5.8 Set IP Information
The IP Information page establishes the IP address scheme. DHCP can be enabled, or static addressing can
be configured. When the system is behind a firewall, the Firewall address must be entered, allowing proper
operation with remote users, devise and SIP trunks. A DNS (Directory Name Server) for Domain Name
resolution should also be entered on this page.
Note that changing any IP address requires a system reset; the reset does not initialize data.
To Next Page
Loading...
