iPECS UCP600 - Ringing Line Preference Priority - PGM 173

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
179
4.4.5.21 Ringing Line Preference Priority - PGM 173
Selecting Ring Line Preference Priority will display the Ringing Line Preference Priority data entry page. Click
the [Save] button after changing Value.
Figure 4.4.5.21-1 Ringing Line Preference Priority
When multiple calls are ringing at the same time to a station assigned Ringing Line Preference, the order of
preference is based on the type of call: CO/IP Transfer, CO/IP Recall, Incoming call, CO/IP Queue. A queued
CO/IP call is always assigned the lowest priority.