iPECS UCP600 - In-Room Indication - PGM 183

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
194
4.4.5.29 In-Room Indication - PGM 183
Selecting the In-Room indication will display the In-Room data entry page. Click the [Save] button after
changing Value.
Figure 4.4.5.29-1 In-Room Indication
The Supervisor Station can set the In-Room Indication for all members in the In-Room indication group. Up to
10 Supervisors (groups) can be configured and programmed. And each can have up to 20 members in the
group, excluding the Supervisor.
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Supervisor
This entry assigns the Station number for the In-Room
Group Supervisor.
Station number
Member 01~20
This entry assigns stations as members of the In-Room
Group.
Station number