iPECS UCP600 - Device Port Number Change- PGM 101

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
39
4.4.1.3 Device Port Number Change– PGM 101
Selecting Device Port Num Change (101) will display the input entry page.
Figure 4.4.1.3-1 eMG80/100Device Port Num Change
Figure 4.4.1.3-2 eMG800 Device Port Num Change
Figure 4.4.1.3-3 UCP Device Port Num Change