iPECS UCP600 - Alarm to External Call

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
157
4.4.5.7 Alarm To External Call
Selecting Alarm External Destination will display the following page. Click the [Save] button after hanging
Value. The online license selection menu can use at the vUCP System only.
Figure 4.4.5.7-1 Alarm To External Call
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
SIP Station
(Caller)
< Registration of a Third Party SIP Extension >
License : “Third Party SIP Extension”
It is a virtual Extension without a physical phone
New Registration
 Refer to “Flexible Station Number (P.105)” and get an unused
Station Number
 Input the Station Number to “SIP Station (Caller)” and press
[Save]
 A new Third Party SIP Extension will be registered
automatically
Replace an existing Third Party SIP Extension
 Refer to “Device IP Plan (P.103)” and get a used Third-Party
SIP Station Number
 Input the Station Number to “SIP Station (Caller)” and press
[Save]
 The Third-Party SIP Extension will be re-registered as a virtual
Extension mode automatically
Delete the virtual Third-Party SIP Extension
 Empty the “SIP Station (Caller)” and press [Save]
 The Third-Party SIP Extension will be automatically removed
from the system
Replace the previous virtual Third-Party SIP Extension
 Input different Station numbers in the “SIP Station (Caller)”
and press [Save]
 The previous Third-Party SIP Extension will be automatically
removed from the system, and the input is (re)registered as
the virtual Third-Party SIP Extension.
Station
Number